ASTM Method D2887/ ISO 3294 Calibration Mix (set of 5x1 ml) - 20 components

Method: Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography.
This test method covers the determination of the boiling range distribution of petroleum products. The test method is applicable to petroleum products and fractions having a final boiling point of 538°C (1000°F) or lower at atmospheric pressure as measured by this test method. This test method is limited to samples having a boiling range greater than 55°C (100°F), and having a vapor pressure sufficiently low to permit sampling at ambient temperature.
Composition:
n-Decane 0.1% (w/w) [124-18-5]
n-Dodecane 0.1% (w/w) [112-40-3]
n-Dotriacontane 0.1% (w/w) [544-85-4]
n-Eicosane 0.1% (w/w) [112-95-8]
n-Heptadecane 0.1% (w/w) [629-78-7]
n-Heptane 0.1% (w/w) [142-82-5]
n-Hexadecane 0.1% (w/w) [544-76-3]
n-Hexane 0.1% (w/w) [110-54-3]
n-Hexatriacontane 0.1% (w/w) [630-06-8]
n-Nonane 0.1% (w/w) [111-84-2]
n-Octacosane 0.1% (w/w) [630-02-4]
n-Octadecane 0.1% (w/w) [593-45-3]
n-Octane 0.1% (w/w) [111-65-9]
n-Pentadecane 0.1% (w/w) [629-62-9]
n-Pentane 0.1% (w/w) [109-66-0]
n-Tetracontane 0.1% (w/w) [4181-95-7]
n-Tetracosane 0.1% (w/w) [646-31-1]
n-Tetradecane 0.1% (w/w) [629-59-4]
n-Tetratetracontane 0.1% (w/w) [7098-22-8]
n-Undecane 0.1% (w/w) [1120-21-4]

Ver más
Referencia Disolvente Envase Volumen Disponibilidad Mi Precio
CPA CHEM CPF1100715 Chloroform Ampoule 1 mL Comprar