ASTM Method D2887 Calibration Solution: 17 components in Chloroform

Method: Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography.
This test method covers the determination of the boiling range distribution of petroleum products. The test method is applicable to petroleum products and fractions having a final boiling point of 538°C (1000°F) or lower at atmospheric pressure as measured by this test method. This test method is limited to samples having a boiling range greater than 55°C (100°F), and having a vapor pressure sufficiently low to permit sampling at ambient temperature.
Composition:
n-Decane 1200mg/ [124-18-5]
n-Dodecane 1200mg/l [112-40-3]
n-Dotriacontane 100mg/l [544-85-4]
n-Eicosane 200mg/l [112-95-8]
n-Heptane 600mg/l [142-82-5]
n-Hexane 600mg/l [110-54-3]
n-Hexadecane 1000mg/l [544-76-3]
n-Hexatriacontane 100mg/l [630-06-8]
n-Nonane 800mg/l [111-84-2]
n-Octadecane 500mg/l [593-45-3]
n-Octane 800mg/l [111-65-9]
n-Tetradecane 1200mg/l [629-59-4]
n-Tetratetracontane 100mg/l [7098-22-8]
n-Undecane 1200mg/l [1120-21-4]
n-Octacosane 100mg/l [630-02-4]
n-Tetracontane 100mg/l [4181-95-7]
n-Tetracosane 200mg/l [646-31-1]

Ver más
CPA CHEM
Disolvente
Chloroform
Envase
Ampoule
Volumen
1 mL
Referencia
CPFC528476
Envase
x1mL
Precio
Comprar
Disponibilidad