Air purifiers

Viruses and other microorganisms are transmitted via extremely fine airborne liquid droplets, called aerosols. These can float and survive in the air even for long periods of time. There is an increased risk of infection in poorly ventilated indoor areas. Therefore, effective room ventilation is a high priority in hygiene concepts, in order to counteract elevated concentrations of hazardous materials. However, room characteristics and winter weather can make natural ventilation more difficult.
Using asecos PURIFIAIR.620 and PURIFIAIR.400 can significantly reduce viral loads and pollution in indoor areas. Fresh air must be supplied to the rooms via natural or technical ventilation. Stand out for their high-quality materials and robust construction. Large filter units ensure a long service life. The purifiers have low energy requirements, resulting in low usage costs.

PURIFIAIR.488 features:
- Removes mould spores, pollen and allergens, eliminates germs and bacteria and neutralises them.
- Continuously filters out fine dust particles.
- Removes unpleasant odours and harmful gases from indoor atmospheres.
- The PURIFIAIR.488 can handle a volume flow rate of up to 488 m3/h (8 operating hours) and is designed for approx. 80 m3 room volume (corresponding to a surface area of 32 m2 at a room height of 2.5 m). A larger number of devices should be used in larger rooms.
- The built-in PM2.5 sensor and colour display allow users to quickly identify and easily read off the particle concentration in the indoor atmosphere in four levels (green/low to red/high concentration.
- Filter technology: Pre-filter, cold catalysis filter, activated carbon filter, high-performance particle filter
- 220-240 V / 50-60 Hz

PURIFIAIR.620 features:
- The mobile design allows the purifier to be used flexibly in different areas of the building.
- The built-in PM1.0 sensor and colour display allow users to quickly identify and easily read off the particle concentration in the indoor atmosphere in four levels (green/low to red/high concentration).
- Every PURIFIAIR.620 handles a volume flow rate of 160 bis to 620 m³/h (5 operating levels) and is suitable for approx. 100 m³ room volume (corresponding to a surface area of 40 m² and a room height of 2.5 m). A larger number of devices should be used in larger rooms
- The built-in combination of pre-filters, an E12 EPA Filter and H14 HEPA Filter in accordance with EN 1822 has an efficiency of up to 99.995 % while keeping out particles from 0.1 bis 0.3 µm in size.
- 220-240 V / 50-60 Hz

Supplied with remote control, as well as an initial multi-component filter unit.

Ver más
AIR PURIFIERS