Rest of the World
Ducted Chemical Fume Hood for Acid Fumes
The new Cruma H+ ducted extraction fume hood, manufactured according to the UNE EN ISO 14175 standard, is specially conceived and designed to work with acids. The cabinet is connected to the laboratory extraction system, generating a depressurized work environment that protects the operator from all types of contaminants handled inside. There is also the option of acquiring an extractor fan made of polypropylene.
The cabinet is made entirely of polypropylene (metal free), a material with excellent chemical resistance to strong acids. Both the sides and the guillotine door are made of transparent polycarbonate with a protective sheet against acid splashes. The air flow is manually adjustable by means of a valve, thus adapting the air fl ow to the different extraction systems that the laboratory has.
Features:
- The entire cabinet is made of polypropylene and laminated polycarbonate to protect from splashes.
- 3 work surface options:
- H+ V1: without work surface (you would work on top of the laboratory table, wich usually has a phenolic surface)
- H+ V2: polypropylene surface
- H+ V3: empered glass surface
- Side walls in polypropylene and transparent polycarbonate for greater illumination
- Extractor pipe diameter 200 mm ready to connect to extraction system (extraction duct not supplied)
- Air diffuser: located in the upper part of the interior of the cabinet for correct suction of air and contaminants
- Guillotine-type front door, with a limiter of 395 mm.
- Fluorescent lamps positioned in the central parts and fitted with a prismatic diffuser screen for a better distribution of light on the working plane
Localised extraction in laboratories is a widely used measure for carrying out all types of chemical tests where operator protection is required. Among these chemical substances, acids are often the most difficult to handle due to their corrosive nature. This property, which increases with temperature, severely damages any type of metal with which it comes into contact.
The new Cruma H+ ducted extraction fume hood, manufactured according to the UNE EN ISO 14175 standard, is specially conceived and designed to work with acids. The cabinet is connected to the laboratory extraction system, generating a depressurized work environment that protects the operator from all types of contaminants handled inside. There is also the option of acquiring an extractor fan made of polypropylene.
The cabinet is made entirely of polypropylene (metal free), a material with excellent chemical resistance to strong acids. Both the sides and the guillotine door are made of transparent polycarbonate with a protective sheet against acid splashes. The air flow is manually adjustable by means of a valve, thus adapting the air fl ow to the different extraction systems that the laboratory has.
Features:
- The entire cabinet is made of polypropylene and laminated polycarbonate to protect from splashes.
- 3 work surface options:
- H+ V1: without work surface (you would work on top of the laboratory table, wich usually has a phenolic surface)
- H+ V2: polypropylene surface
- H+ V3: empered glass surface
- Side walls in polypropylene and transparent polycarbonate for greater illumination
- Extractor pipe diameter 200 mm ready to connect to extraction system (extraction duct not supplied)
- Air diffuser: located in the upper part of the interior of the cabinet for correct suction of air and contaminants
- Guillotine-type front door, with a limiter of 395 mm.
- Fluorescent lamps positioned in the central parts and fitted with a prismatic diffuser screen for a better distribution of light on the working plane
Features
H+ V1 Work surface option
Without work surface External dimensions WxHxD (mm)
1200 x 1700 x 650 Internal dimensions WxHxD (mm)
1170 x 110 x 550 Air average speed (m/s)
0.6 Weight (Kg)
98 Pack (u.)
1
H+ V2 Work surface option
Polypropylene External dimensions WxHxD (mm)
1200 x 1700 x 650 Internal dimensions WxHxD (mm)
1170 x 110 x 550 Air average speed (m/s)
0.6 Weight (Kg)
98 Pack (u.)
1
H+ V3 Work surface option
Tempered glass External dimensions WxHxD (mm)
1200 x 1700 x 650 Internal dimensions WxHxD (mm)
1170 x 110 x 550 Air average speed (m/s)
0.6 Weight (Kg)
98 Pack (u.)
1
Connect:
Gato Pérez, 33. Pol. Ind. Mas d’en Cisa E08181 Sentmenat, Barcelona, España
T +34937456400F +34937152765
helpdesk@scharlab.com
Chemicals Microbiology Glassware, quartz and porcelain Chromatography Equipment Consumables Safety and hygiene