CO2 incubator

CO2 Incubators with microprocessor control and digital display of temperature and CO2.

External case of steel coated with epoxy with insulated chamber. Inner chamber stainless steel shelf bracket, easily removable to facilitate cleaning inside the camera. Double door. An interior, tempered glass with silicon gasket and other external steel door with magnetic closure properly heated to prevent condensation on the glass door. Smooth door closing, preventing vibration inside the camera. Infrared CO2 sensor. sterilization of the camera function. RS232 output for reading and printing parameters by computer. CO2 taking back by metal terminal for 6x4mm tube diameter. Constant humidity degree. Display LCD display parameters. Mixer multifunction button.

Safety: Standard DIN 12880 Class 3.1. A second independent temperature controller ensures overtemperature protection. Forward CO2 setpoint. Indicator open door. Indicator of power failure. Lack of pressure indicator of CO2 .

Regulation and control. digital electronic control of temperature and CO2 by mixer button and LCD display for easy commissioning and operation of the camera. Humidity control. The humidity inside the chamber is constant, on the order of 98% rh and produced directly by evaporation of the water previously introduced into the bottom of the chamber.

For adjustable temperatures from ambient 5°C to 50°C.
Paramethers at 37 °C:
- Stability: ± 0.2°C. Homogeneity: ± 0.5°C. Resolution: 0.1°C.
- Alarm range: from ambient 5°C to 50°C. Resolution: 0.1°C.
- CO2 range: 0 to 20%. Stability: ± 0.3%. Resolution: 0.1%.

Ver más
INCUBATORS AND CLIMATE CHAMBERS