English En

CryoTouch 1/CryoTouch 20/ CryoTouch 40 automatic cryoscopers with 'lactose-free' function

CryoTouch cryoscopers are automatic equipments for the rapid determination of the milk cryoscopic point variation caused by added water, in full compliance with the IDF-ISO 5764:2009 international reference standard. CryoTouch 20 and CryoTouch 40 models have a 20-place autosampler carousel and 40-place autosampler carousel, respectively.
These new generation cryoscopers include a lot of useful features that the most recent technology allows: a full colour 7' touchscreen display, real-time visualization of the freezing curve, stable memory for more than 4,000 results, a PC software for data handling, a USB port for downloading all data to a pen drive and much more. They allow milk labs and dairy industries to perform official analysis based on ISO reference method. The new 'lactose-free' function helps milk and dairy industries monitor the process of removal of lactose in milk and cream.

Features:
- 6 values for setting the reference value and between 2 different formula to calculate the added water %
- 2 reading modes: plateau mode according to ISO method or fixed- time mode
- Real-time graph of the sample temperature during each analysis
- An alphanumeric ID code can be added to each sample
- Optional barcode reader for a quick sample identification (to be requested at the order)
- Results shown in different colours for a quick check of anomalies or critical values
- 'Lactose-free milk' function to control the removal of lactose in milk/cream
- Stable memory for 2 different calibration curves: the typical one in compliance with ISO requirements and a second one to be set according to the user's needs (i.e.: Lactose-free curve)
- Stable memory for up to 4,000 results
- Easy download of test results to a USB pen drive
- Real time PC monitoring or quick download of test results to a PC thanks to CryoSoft Touch data software
- Immediate visualization of error messages

Specifications:
- Full colour 7' touchscreen display
- Bath with Peltier cells controlled by software
- Working room temperature: from +5°C to +36°C
- Automatic calibration
- Lash and agitation width controlled by software
- Selectable °C, °Hortvet and water% units
- Analysis duration: about 2 minutes/test
- Warm up time: about 5 minutes
- USB port for data downloading to a pen drive
- 2 x RS232 ports for connecting an optional thermal printer and a PC
- An additional RS232 port can be added for connecting an optional barcode reader
- Power supply: 110/220 V, 50/60 Hz, 150 W

All cryoscopes are supplied with a 'starter-kit' including a box of glass sample tubes, a tube-holder, 3 calibration standards and a cooling liquid bottle.