Magnetic Stirrer with heating RET basic anodized. IKA®. Plate material: Aluminum with ceramic coating. Speed range (rpm): 50 - 1500. Temperature range (ºC): room temp. - 310. Stirring volume (L): 20. Ø plate (mm): 135. Dimensions WxHxD (mm): 160x100x200. Weight (kg): 2.3. Voltage (V): 220–230. Frequency (Hz): 50/60. With integrated RS232, USB, LAN or WLAN interface. Supplied with: PT 1000.60 Temperature sensor, stainless steel, H 80 Temperature Sensor Holder, PEEK, IKAFLON® 30 and IKAFLON® 40 Magnetic stirring bar and screw driver.

Characteristic
Model : RET basic anodized
Stirring positions : 1
Speed (rpm) : 50-1700
Stirring volume (L) : 20
Plate material : Aluminum with ceramic coating
Plate diameter (mm) : 135
Dimensions WxHxD (mm) : 160x100x200
Weight (Kg) : 2.3
Pack (u.) : 1

The RET basic magnetic stirrer is a new benchmark for digitalization, laboratory safety and efficiency.
The RET basic is equipped as standard with integrated WLAN and LAN interfaces. This makes it the ideal solution for digitalization and documentation projects in which devices need to be centrally networked, monitored, controlled or integrated into software systems.
The RCT is optionally available with a coated (anodized) heating plate. The high-quality anodized coating provides reliable protection against scratches and a wide range of chemicals.
- Integrated menu functionality, which significantly expands the range of functions.
-Freely programmable timer starts either immediately or after the target temperature has been reached and signals the end of the process with an acoustic signal.
- The brushless EC motor and high-quality magnets ensure excellent magnetic coupling at up to 1700 rpm.
- Heating rates can be adjusted in four stages: for slow, gentle, or fast heating.
- Customizable 14-segment glass display, you can decide which parameters are relevant and can display them permanently: speed, temperature, pH value, or timer. In combination with the PT.Wireless and ETS-D7 wireless sensors, the RCT/RET even becomes a fully-fledged pH meter.
- Option of monitoring and controlling the RCT via software (e.g. IKA Labworldsoft®) via the integrated RS232, USB, LAN or WLAN interface.
- IKA Lab Assistant app (coming soon) enables wireless monitoring within the laboratory for maximum flexibility and control (accessories required).
- Monitoring the temperature in the medium with the Delta-T safety function. A definable temperature difference to the medium setpoint ensures that if this is exceded, the heating is switched off until restart (stirring remains active).
- Detection of sudden temperature drops and detection of failure to increase temperatura.
- Dual sensors for medium and carrier médium.  Up to two temperature sensors (wired and wireless) can be connected. and temperature limits set for medium and Carrier can be set in the software.
- Warning of hot surface (> 50 °C).
- Combination with IKA contact thermometer (ETS-D5) results in even better measurement accuracy and a clear display at the measuring point.
- 'Always Stir': stirring remains active in the event of a fault to prevent boiling delays and hot spots.

Technical Data:
- Heating temperature range (ºC): Room temperature + device self heating - 340.
- Heating power (W): 800.
- Motor rating input/output (W): 9.
- Stirring bar length (mm): 20 - 80.
- Protection: IP54.
- Voltage (V): 220–230.
- Frequency (Hz): 50/60.

Supplied with: PT 1000.60 Temperature sensor, stainless steel, H 80 Temperature Sensor Holder, PEEK, IKAFLON® 30 and IKAFLON® 40 Magnetic stirring bar and screw driver.