Rest of the World
ECODryBlock Dry block heaters
ECODryBlock is a modular, digital, and precise dry block heater designed for sample preparation, incubation, DNA denaturation, enzymatic reactions, culture media tests, and COD analysis.
- Operating is simple and precise thanks to the 7-inch capacitive touch ControlPad, featuring a chemical-resistant glass surface.
- Users can easily set independent timers and temperatures for each module.
- The transparent cover creates a warm air jacket around the blocks, ensuring exceptional stability and uniformity.
- Combined with a digital interface for accurate control and easy monitoring, it guarantees repeatable and reliable results across every application.
- For direct monitoring and control of the sample temperature, external probes (Pt100 and Pt1000) provide precise measurement and regulation within the sample vessel.
- One ControlPad can manage up to two heating modules, each with space for two aluminum blocks (95x76x51 mm). This configuration allows you to set different temperatures on each module.
The ECODryBlock COD 24 model includes block (VA00000494) and transparent lid (VA00000493).
The ECODryBlock COD 4 model includes block (VA00000529). The following accessories are required but NOT INCLUDED: test tubes of 42x200mm with cone NS29/32 (A00000145), sample rack for VA00000529 (A00000532), air condenser with ground cone (A00001041), fPTFE sheaths for 29/32 cones (A00001042) and antisplash bell (A00001045).
There is a wide range of interchangeable aluminium blocks as well as other accessories available for the ECODryBlock thermoreactor.
- Operating is simple and precise thanks to the 7-inch capacitive touch ControlPad, featuring a chemical-resistant glass surface.
- Users can easily set independent timers and temperatures for each module.
- The transparent cover creates a warm air jacket around the blocks, ensuring exceptional stability and uniformity.
- Combined with a digital interface for accurate control and easy monitoring, it guarantees repeatable and reliable results across every application.
- For direct monitoring and control of the sample temperature, external probes (Pt100 and Pt1000) provide precise measurement and regulation within the sample vessel.
- One ControlPad can manage up to two heating modules, each with space for two aluminum blocks (95x76x51 mm). This configuration allows you to set different temperatures on each module.
The ECODryBlock COD 24 model includes block (VA00000494) and transparent lid (VA00000493).
The ECODryBlock COD 4 model includes block (VA00000529). The following accessories are required but NOT INCLUDED: test tubes of 42x200mm with cone NS29/32 (A00000145), sample rack for VA00000529 (A00000532), air condenser with ground cone (A00001041), fPTFE sheaths for 29/32 cones (A00001042) and antisplash bell (A00001045).
There is a wide range of interchangeable aluminium blocks as well as other accessories available for the ECODryBlock thermoreactor.
ECODryBlock is a modular, digital, and precise dry block heater designed for sample preparation, incubation, DNA denaturation, enzymatic reactions, culture media tests, and COD analysis.
- Operating is simple and precise thanks to the 7-inch capacitive touch ControlPad, featuring a chemical-resistant glass surface.
- Users can easily set independent timers and temperatures for each module.
- The transparent cover creates a warm air jacket around the blocks, ensuring exceptional stability and uniformity.
- Combined with a digital interface for accurate control and easy monitoring, it guarantees repeatable and reliable results across every application.
- For direct monitoring and control of the sample temperature, external probes (Pt100 and Pt1000) provide precise measurement and regulation within the sample vessel.
- One ControlPad can manage up to two heating modules, each with space for two aluminum blocks (95x76x51 mm). This configuration allows you to set different temperatures on each module.
The ECODryBlock COD 24 model includes block (VA00000494) and transparent lid (VA00000493).
The ECODryBlock COD 4 model includes block (VA00000529). The following accessories are required but NOT INCLUDED: test tubes of 42x200mm with cone NS29/32 (A00000145), sample rack for VA00000529 (A00000532), air condenser with ground cone (A00001041), fPTFE sheaths for 29/32 cones (A00001042) and antisplash bell (A00001045).
There is a wide range of interchangeable aluminium blocks as well as other accessories available for the ECODryBlock thermoreactor.
Features
+See More
ECODryBlock Systems
Model
ECODryBlock System Temperature range (ºC)
Room temperature +5 to 165 Temperature stability (ºC)
±0.2 (37 ºC), ±0.4 (60 ºC), ±0.5 (165 ºC) Temperature uniformity (ºC)
±0.2 (37 ºC), ±0.4 (60 ºC), ±0.5 (165 ºC) Weight (Kg)
2.1 (with ControlPad) 1.3 (without ControlPad) Dimensions WxHxD (mm)
228x92.5x350 (with ControlPad) 207x92.5x195 (without ControlPad) Pack (u.)
1
ECODryBlock System Temperature range (ºC)
Room temperature +5 to 165 Temperature stability (ºC)
±0.2 (37 ºC), ±0.4 (60 ºC), ±0.5 (165 ºC) Temperature uniformity (ºC)
±0.2 (37 ºC), ±0.4 (60 ºC), ±0.5 (165 ºC) Weight (Kg)
2.1 (with ControlPad) 1.3 (without ControlPad) Dimensions WxHxD (mm)
228x92.5x350 (with ControlPad) 207x92.5x195 (without ControlPad) Pack (u.)
1
Model
ECODryBlock System COD 24 Temperature range (ºC)
Room temperature +5 to 165 Temperature stability (ºC)
±0.2 (37 ºC), ±0.4 (60 ºC), ±0.5 (165 ºC) Temperature uniformity (ºC)
±0.2 (37 ºC), ±0.4 (60 ºC), ±0.5 (165 ºC) Weight (Kg)
2.1 (with ControlPad) 1.3 (without ControlPad) Dimensions WxHxD (mm)
228x92.5x350 (with ControlPad) 207x92.5x195 (without ControlPad) Pack (u.)
1
ECODryBlock System COD 24 Temperature range (ºC)
Room temperature +5 to 165 Temperature stability (ºC)
±0.2 (37 ºC), ±0.4 (60 ºC), ±0.5 (165 ºC) Temperature uniformity (ºC)
±0.2 (37 ºC), ±0.4 (60 ºC), ±0.5 (165 ºC) Weight (Kg)
2.1 (with ControlPad) 1.3 (without ControlPad) Dimensions WxHxD (mm)
228x92.5x350 (with ControlPad) 207x92.5x195 (without ControlPad) Pack (u.)
1
Model
ECODryBlock System COD 4 Temperature range (ºC)
Room temperature +5 to 165 Temperature stability (ºC)
±0.2 (37 ºC), ±0.4 (60 ºC), ±0.5 (165 ºC) Temperature uniformity (ºC)
±0.2 (37 ºC), ±0.4 (60 ºC), ±0.5 (165 ºC) Weight (Kg)
2.1 (with ControlPad) 1.3 (without ControlPad) Dimensions WxHxD (mm)
228x92.5x350 (with ControlPad) 207x92.5x195 (without ControlPad) Pack (u.)
1
ECODryBlock System COD 4 Temperature range (ºC)
Room temperature +5 to 165 Temperature stability (ºC)
±0.2 (37 ºC), ±0.4 (60 ºC), ±0.5 (165 ºC) Temperature uniformity (ºC)
±0.2 (37 ºC), ±0.4 (60 ºC), ±0.5 (165 ºC) Weight (Kg)
2.1 (with ControlPad) 1.3 (without ControlPad) Dimensions WxHxD (mm)
228x92.5x350 (with ControlPad) 207x92.5x195 (without ControlPad) Pack (u.)
1
Accessories
Description
ECODryBlock wihtout ControlPad Pack (u.)
1
ECODryBlock wihtout ControlPad Pack (u.)
1
Description
Kit ECODryBlock junction. Required for ECODryBlock without ControlPad (VF101A0700) Pack (u.)
1
Kit ECODryBlock junction. Required for ECODryBlock without ControlPad (VF101A0700) Pack (u.)
1
Description
Aluminum block for 30 wells for 6 mm round-bottom. Dimensions (ØxD mm): 8.3x48.4 Pack (u.)
1
Aluminum block for 30 wells for 6 mm round-bottom. Dimensions (ØxD mm): 8.3x48.4 Pack (u.)
1
Description
Aluminum block for 24 wells for 10 mm round-bottom tubes. Dimensions (ØxD mm): 10.7x48.4 Pack (u.)
1
Aluminum block for 24 wells for 10 mm round-bottom tubes. Dimensions (ØxD mm): 10.7x48.4 Pack (u.)
1
Description
Aluminum block for 16 wells for 12-13 mm round-bottom tubes. Dimensions (ØxD mm): 13.9x48.4 Pack (u.)
1
Aluminum block for 16 wells for 12-13 mm round-bottom tubes. Dimensions (ØxD mm): 13.9x48.4 Pack (u.)
1
Description
Aluminum block for 20 wells for 12-13 mm round-bottom tubes. Dimensions (ØxD mm): 13.9x48.4 Pack (u.)
1
Aluminum block for 20 wells for 12-13 mm round-bottom tubes. Dimensions (ØxD mm): 13.9x48.4 Pack (u.)
1
Description
Aluminum block for 12 wells for 15-16 mm round-bottom tubes. Dimensions (ØxD mm): 17.5x48.4 Pack (u.)
1
Aluminum block for 12 wells for 15-16 mm round-bottom tubes. Dimensions (ØxD mm): 17.5x48.4 Pack (u.)
1
Description
Aluminum block for 12 wells for 17-18 mm round-bottom tubes. Dimensions (ØxD mm): 19.1x48.4 Pack (u.)
1
Aluminum block for 12 wells for 17-18 mm round-bottom tubes. Dimensions (ØxD mm): 19.1x48.4 Pack (u.)
1
Description
Aluminum block for 8 wells for 20 mm round-bottom tubes. Dimensions (ØxD mm): 21x48.4 Pack (u.)
1
Aluminum block for 8 wells for 20 mm round-bottom tubes. Dimensions (ØxD mm): 21x48.4 Pack (u.)
1
Description
Aluminum block for 6 wells for 25 mm round-bottom tubes. Dimensions (ØxD mm): 26.2x48.4 Pack (u.)
1
Aluminum block for 6 wells for 25 mm round-bottom tubes. Dimensions (ØxD mm): 26.2x48.4 Pack (u.)
1
Description
Aluminum block for 4 wells for 35 mm round-bottom tubes. Dimensions (ØxD mm): 35x47.6 Pack (u.)
1
Aluminum block for 4 wells for 35 mm round-bottom tubes. Dimensions (ØxD mm): 35x47.6 Pack (u.)
1
Description
Aluminum block for 30 wells for PCR tubes (0.5 mL). Dimensions (ØxD mm): 7.9x27.6 Pack (u.)
1
Aluminum block for 30 wells for PCR tubes (0.5 mL). Dimensions (ØxD mm): 7.9x27.6 Pack (u.)
1
Description
Aluminum block for 20 wells for 1.5 mL microcentrifuge tubes. Dimensions (ØxD mm): 11.5x36.9 Pack (u.)
1
Aluminum block for 20 wells for 1.5 mL microcentrifuge tubes. Dimensions (ØxD mm): 11.5x36.9 Pack (u.)
1
Description
Aluminum block for 20 wells for 1.5 mL microcentrifuge conical tubes. Dimensions (ØxD mm): 10.9x39.1 Pack (u.)
1
Aluminum block for 20 wells for 1.5 mL microcentrifuge conical tubes. Dimensions (ØxD mm): 10.9x39.1 Pack (u.)
1
Description
Aluminum block for 20 wells for 2 mL microcentrifuge tubes. Dimensions (ØxD mm): 10.9x38.1 Pack (u.)
1
Aluminum block for 20 wells for 2 mL microcentrifuge tubes. Dimensions (ØxD mm): 10.9x38.1 Pack (u.)
1
Description
Aluminum block for 20 wells for 2 mL microcentrifuge tubes. Dimensions (ØxD mm): 10.9x38.1 Pack (u.)
1
Aluminum block for 20 wells for 2 mL microcentrifuge tubes. Dimensions (ØxD mm): 10.9x38.1 Pack (u.)
1
Description
Aluminum block for 12 wells for 15 mL conical centrifuge tubes. Dimensions (ØxD mm): 17.1x44.5 Pack (u.)
1
Aluminum block for 12 wells for 15 mL conical centrifuge tubes. Dimensions (ØxD mm): 17.1x44.5 Pack (u.)
1
Description
Aluminum block for 5 wells for 50 mL conical centrifuge tubes. Dimensions (ØxD mm): 29x47.6 Pack (u.)
1
Aluminum block for 5 wells for 50 mL conical centrifuge tubes. Dimensions (ØxD mm): 29x47.6 Pack (u.)
1
Description
Aluminum block for 6 wells for 6 mm round-bottom tubes + 5 wells for 12-13 mm round-bottom tubes + 3 wells for 25 mmm round-bottom. Dimensions (ØxD mm): 8.3/13.9/26.2x48.4 Pack (u.)
1
Aluminum block for 6 wells for 6 mm round-bottom tubes + 5 wells for 12-13 mm round-bottom tubes + 3 wells for 25 mmm round-bottom. Dimensions (ØxD mm): 8.3/13.9/26.2x48.4 Pack (u.)
1
Description
Aluminum block for 4 wells for 1.5 mL conical centrifuge tubes + 3 wells for 15 mL conical centrifuge tubes + 2 wells for 50 mL conical centrifuge tubes. Dimensions (ØxD mm): 11.1x39.1 / 17.1x44.5 / 29x47.6 Pack (u.)
1
Aluminum block for 4 wells for 1.5 mL conical centrifuge tubes + 3 wells for 15 mL conical centrifuge tubes + 2 wells for 50 mL conical centrifuge tubes. Dimensions (ØxD mm): 11.1x39.1 / 17.1x44.5 / 29x47.6 Pack (u.)
1
Description
Aluminum block for 6 wells for 0.5 mL microcentrifuge tubes + 10 wells for 1.5 mL microcentrifuge tubes + 5 wells for 2.0 mL microcentrifuge tubes. Dimensions (ØxD mm): 7.9x27.6 / 11.1x39.1 / 11.5x38.1 Pack (u.)
1
Aluminum block for 6 wells for 0.5 mL microcentrifuge tubes + 10 wells for 1.5 mL microcentrifuge tubes + 5 wells for 2.0 mL microcentrifuge tubes. Dimensions (ØxD mm): 7.9x27.6 / 11.1x39.1 / 11.5x38.1 Pack (u.)
1
Description
Aluminum block for 20 wells for 12 mm vials. Dimensions (ØxD mm): 12.7x30 Pack (u.)
1
Aluminum block for 20 wells for 12 mm vials. Dimensions (ØxD mm): 12.7x30 Pack (u.)
1
Description
Aluminum block for 20 wells for 15 mm vials. Dimensions (ØxD mm): 15.8x35 Pack (u.)
1
Aluminum block for 20 wells for 15 mm vials. Dimensions (ØxD mm): 15.8x35 Pack (u.)
1
Description
Aluminum block for 15 wells for 16 mm vials. Dimensions (ØxD mm): 16.4x45 Pack (u.)
1
Aluminum block for 15 wells for 16 mm vials. Dimensions (ØxD mm): 16.4x45 Pack (u.)
1
Description
Aluminum block for 12 wells for 17 mm vials. Dimensions (ØxD mm): 17.8x45 Pack (u.)
1
Aluminum block for 12 wells for 17 mm vials. Dimensions (ØxD mm): 17.8x45 Pack (u.)
1
Description
Aluminum block for 12 wells for 19 mm vials. Dimensions (ØxD mm): 19.7x45 Pack (u.)
1
Aluminum block for 12 wells for 19 mm vials. Dimensions (ØxD mm): 19.7x45 Pack (u.)
1
Description
Aluminum block for 9 wells for 21 mm vials. Dimensions (ØxD mm): 21.7x45 Pack (u.)
1
Aluminum block for 9 wells for 21 mm vials. Dimensions (ØxD mm): 21.7x45 Pack (u.)
1
Description
Aluminum block for 8 wells for 23 mm vials. Dimensions (ØxD mm): 23.8x45 Pack (u.)
1
Aluminum block for 8 wells for 23 mm vials. Dimensions (ØxD mm): 23.8x45 Pack (u.)
1
Description
Aluminum block for 8 wells for 25 mm vials. Dimensions (ØxD mm): 25.8x45 Pack (u.)
1
Aluminum block for 8 wells for 25 mm vials. Dimensions (ØxD mm): 25.8x45 Pack (u.)
1
Description
Aluminum block for 6 wells for 28 mm vials. Dimensions (ØxD mm): 28.8x45 Pack (u.)
1
Aluminum block for 6 wells for 28 mm vials. Dimensions (ØxD mm): 28.8x45 Pack (u.)
1
Description
Aluminum block for 64 wells for 0.2 mL individual PCR tubes. Dimensions (ØxD mm): 6.4x20.2 Pack (u.)
1
Aluminum block for 64 wells for 0.2 mL individual PCR tubes. Dimensions (ØxD mm): 6.4x20.2 Pack (u.)
1
Description
Aluminum block for 80 wells for 0.2 mL PCR tube strips. Dimensions (ØxD mm): 6.6x15.5 Pack (u.)
1
Aluminum block for 80 wells for 0.2 mL PCR tube strips. Dimensions (ØxD mm): 6.6x15.5 Pack (u.)
1
Description
Aluminum block for 96-well PCR plate (0.2 mL wells). Dimensions (ØxD mm): 6.6x15.5 Pack (u.)
1
Aluminum block for 96-well PCR plate (0.2 mL wells). Dimensions (ØxD mm): 6.6x15.5 Pack (u.)
1
Description
Aluminum block for 12 positions (2x6) for 12.5 mm cuvettes. Dimensions (D mm): 25.4 Pack (u.)
1
Aluminum block for 12 positions (2x6) for 12.5 mm cuvettes. Dimensions (D mm): 25.4 Pack (u.)
1
Description
Aluminum block for 24 wells for 16 mm round-bottom tubes. Dimensions (ØxD mm): 16x47 Pack (u.)
1
Aluminum block for 24 wells for 16 mm round-bottom tubes. Dimensions (ØxD mm): 16x47 Pack (u.)
1
Description
Aluminum block for 4 wells for 42 mm round-bottom tubes. Dimensions (ØxD mm): 42x51 Pack (u.)
1
Aluminum block for 4 wells for 42 mm round-bottom tubes. Dimensions (ØxD mm): 42x51 Pack (u.)
1
Description
Aluminum block for 18 wells for 16 mm round-bottom tubes + 52 wells for 22 mm round-bottom tubes. Dimensions (ØxD mm): 16x47 / 22x45.5 Pack (u.)
1
Aluminum block for 18 wells for 16 mm round-bottom tubes + 52 wells for 22 mm round-bottom tubes. Dimensions (ØxD mm): 16x47 / 22x45.5 Pack (u.)
1
Description
Clamp with probe support Pack (u.)
1
Clamp with probe support Pack (u.)
1
Description
Handle for Block removal Pack (u.)
1
Handle for Block removal Pack (u.)
1
Description
Support rod Pack (u.)
1
Support rod Pack (u.)
1
Description
Transparent lid for ECODryBlock Pack (u.)
1
Transparent lid for ECODryBlock Pack (u.)
1
Description
Sample rack for VA00000529 Pack (u.)
1
Sample rack for VA00000529 Pack (u.)
1
Description
Air condenser with ground cone Pack (u.)
1
Air condenser with ground cone Pack (u.)
1
Description
Antisplash bell Pack (u.)
1
Antisplash bell Pack (u.)
1
Description
PTFE sheaths for 29/32 cones Pack (u.)
1
PTFE sheaths for 29/32 cones Pack (u.)
1
Description
COD test tubes Ø 42x200 mm, 200 mL with cone NS 29/32 Pack (u.)
1x3
COD test tubes Ø 42x200 mm, 200 mL with cone NS 29/32 Pack (u.)
1x3
Description
Condenser 200 mm, type KS Pack (u.)
1
Condenser 200 mm, type KS Pack (u.)
1
Description
Holder for 12 round glass cells Pack (u.)
1
Holder for 12 round glass cells Pack (u.)
1
Description
Set of 20 glass test tube Ø 16 mm Pack (u.)
1
Set of 20 glass test tube Ø 16 mm Pack (u.)
1
Description
Test tube for sample decomposition Ø 22mm, NS 19/26 cone with glass cap Pack (u.)
1
Test tube for sample decomposition Ø 22mm, NS 19/26 cone with glass cap Pack (u.)
1
Description
Absorption attachment for condenser Pack (u.)
1
Absorption attachment for condenser Pack (u.)
1
Description
Pt100 Probe AISI 316 Ti Ø3 mm Pack (u.)
1
Pt100 Probe AISI 316 Ti Ø3 mm Pack (u.)
1
Description
Pt1000 Probe AISI 316 Ti Ø3 mm Pack (u.)
1
Pt1000 Probe AISI 316 Ti Ø3 mm Pack (u.)
1
Connect:
Scharlab S.L.
F +34937152765
helpdesk@scharlab.com
Gato Pérez, 33. Pol. Ind. Mas d’en Cisa E08181 Sentmenat, Barcelona, España
T +34937456400F +34937152765
helpdesk@scharlab.com
Laboratory supplies
Chemicals Microbiology Glassware, quartz and porcelain Chromatography Equipment Consumables Safety and hygiene
Chemicals Microbiology Glassware, quartz and porcelain Chromatography Equipment Consumables Safety and hygiene