Chloroform, for analysis, ExpertQ®, ACS, ISO, stabilized with ethanol

- Synonyms: Trichloromethane, Formyl trichloride
- CHCl3
- M = 119,38 g/mol
- CAS [67-66-3]
- EINECS-No.: 200-663-8
- Density: 1,47 g/cm3
- Solub. in water: (20 ºC): 8 g/l
- Melting point: -63 ºC
- Boiling point: 61 ºC
- Ignition temp.: 982 ºC
- Vapour pressure: (20º C) 213 hPa
- Dielectric const.: (20 ºC) 4,8
- LD 50 (oral, rat): 908 mg/kg
- EC-Index-No.: 602-006-00-4
- ADR: 6.1 T1 III UN 1888
- IMDG: 6.1 III UN 1888
- IATA/ICAO: 6.1 III UN 1888
- GHS-signal word: Danger
- GHS-H sentences: H302 - H315 - H319 - H331 - H351 - H361d - H372
- GHS-P sentences: P260 - P280 - P305+P351+P338 - P321 - P405 - P501a
- Tariff number: 2903 13 00 00
- Applications: solvents, analytical chemistry, in the rubber industry.

SPECIFICATIONS
assay (G.C.): min. 99,8 %
identity (IR-spectrum): passes test
density (20º/4º): 1,474 - 1,483
appearance: clear
colour (Hazen): max. 10
ethanol (G.C.): 0,5 - 1,0 %
free acid (as HCl): max. 0,0002 %
free chlorine (as Cl): max. 0,00003 %
chlorides (Cl): max. 0,00002 %
aluminium (Al): max. 0,5 ppm
acid and chloride: passes test
barium (Ba): max. 0,1 ppm
boron (B): max. 0,02 ppm
cadmium (Cd): max. 0,05 ppm
calcium (Ca): max. 0,5 ppm
chromium (Cr): max. 0,02 ppm
cobalt (Co): max. 0,02 ppm
copper (Cu): max. 0,02 ppm
iron (Fe): max. 0,1 ppm
lead (Pb): max. 0,000005 %
magnesium (Mg): max. 0,1 ppm
manganese (Mn): max. 0,02 ppm
nickel (Ni): max. 0,02 ppm
tin (Sn): max. 0,1 ppm
zinc (Zn): max. 0,1 ppm
carbon tetrachloride (G.C.): max. 0,01 %
dichloromethane (G.C.): max. 0,01 %
tetrachloroethylene (G.C.): max. 0,01 %
trichloroethylene (G.C.): max. 0,01 %
carbonyl compounds (as CO): max. 0,005 %
aldehydes and ketones (as C2H5CHO): passes test
substances darkened by H2SO4: passes test
residue on evaporation: max. 0,0005 %
water (K.F.): max. 0,01 %
suitability for use in dithizone tests: passes test