Diisopropyl ether, for analysis, ExpertQ®, ACS, stabilized with approx. 50 ppm of 2,6-Di-tert-butyl-4-methylphenol (BHT)
- Synonyms: Isopropyl ether, 2,2'-Oxybis[propane], 2,2-Propoxypropane
- C6H14O
- M = 102,18 g/mol
- CAS [108-20-3]
- EINECS-No.: 203-560-6
- Density: 0,72 g/cm3
- Solub. in water: (20 ºC): 12 g/l
- Melting point: -86 ºC
- Boiling point: 67 - 70 ºC
- Flash pt. -28 ºC
- Ignition temp.: 405 ºC
- Vapour pressure: (20 ºC) 175 hPa
- Dielectric const.: (25 ºC) 3,8
- LD 50 (oral, rat): 8470 mg/kg
- EC-Index-No.: 603-045-00-X [2]
- ADR: 3 F1 II UN 1159
- IMDG: 3 II UN 1159
- IATA/ICAO: 3 II UN 1159
- GHS-signal word: Danger
- GHS-H sentences: H225 - H336 - EUH019 - EUH066
- GHS-P sentences: P210 - P241 - P303+P361+P353 - P370+P378 - P405 - P501a
- Tariff number: 2909 19 00 90
- Applications: analytical chemistry, solvents.
SPECIFICATIONS
assay (G.C.): min. 99,5 %
identity (IR-spectrum): passes test
density (20º/4º): 0,722 - 0,724
appearance: clear
colour (Hazen): max. 10
acidity: max. 0,0005 meq/g
alkalinity: max. 0,0002 meq/g
aluminium (Al): max. 0,5 ppm
barium (Ba): max. 0,1 ppm
boron (B): max. 0,02 ppm
cadmium (Cd): max. 0,05 ppm
calcium (Ca): max. 0,5 ppm
chromium (Cr): max. 0,02 ppm
cobalt (Co): max. 0,02 ppm
copper (Cu): max. 0,02 ppm
iron (Fe): max. 0,1 ppm
lead (Pb): max. 0,1 ppm
lithium (Li): max. 0,1 ppm
magnesium (Mg): max. 0,1 ppm
manganese (Mn): max. 0,02 ppm
nickel (Ni): max. 0,02 ppm
tin (Sn): max. 0,1 ppm
zinc (Zn): max. 0,1 ppm
peroxides (as C6H14O2): max. 0,001 %
residue on evaporation: max. 0,005 %
water (K.F.): max. 0,05 %
| Reference | Volume | ||
|---|---|---|---|
|
|
|
ET0087025A | x 25 l |
|
|
|
ET00871000 | x 1 l |
|
|
|
ET00872500 | x 2,5 l |
Connect:
No. 35 Sto. Niño Street corner Roosevelt Ave. Barangay San Antonio, Quezon City 1105, Philippines
T +63 2 8529 5726F +63 2 8529 5726
infophilippines@scharlab.ph
Chemicals Microbiology Glassware, quartz and porcelain Chromatography Equipment Consumables Safety and hygiene