Metilene cloruro, secco (mass. 0,005% H2O), per analisi, ExpertQ®, stabilizzato con appross. 50 ppm di amilene

- Synonyms: Methylene chloride, Chloromethylene
- CH2Cl2
- M = 84,93 g/mol
- CAS [75-09-2]
- EINECS-No.: 200-838-9
- Density: 1,32 g/cm3
- Solub. in water: (20 ºC): 20 g/l
- Melting point: ~ -95 ºC
- Boiling point: 40 ºC
- Ignition temp.: 605 ºC
- Vapour pressure: (20 ºC) 475 hPa
- Dielectric const.: (20 ºC) 9,1
- LD 50 (oral, rat): 1600 mg/kg
- EC-Index-No.: 602-004-00-3
- ADR: 6.1 T1 III UN 1593
- IMDG: 6.1 III UN 1593
- IATA/ICAO: 6.1 III UN 1593
- GHS-signal word: Warning
- GHS-H sentences: H315 - H319 - H335 - H336 - H351 - H373 -
- GHS-P sentences: P260 - P280 - P305+P351+P338 - P321 - P405 - P501a
- Tariff number: 2903 12 00 00
- Applications: solvents, analytical chemistry.

SPECIFICATIONS
assay (G.C.): min. 99,9 %
identity (IR-spectrum): passes test
density (20º/4º): 1,323 - 1,327
colour (Hazen): max. 10
acidity: max. 0,0005 meq/g
alkalinity: max. 0,0002 meq/g
free chlorine (as Cl): max. 0,00003 %
aluminium (Al): max. 0,5 ppm
barium (Ba): max. 0,1 ppm
boron (B): max. 0,02 ppm
cadmium (Cd): max. 0,05 ppm
calcium (Ca): max. 0,5 ppm
chromium (Cr): max. 0,02 ppm
cobalt (Co): max. 0,02 ppm
copper (Cu): max. 0,02 ppm
iron (Fe): max. 0,1 ppm
lead (Pb): max. 0,1 ppm
magnesium (Mg): max. 0,1 ppm
manganese (Mn): max. 0,02 ppm
nickel (Ni): max. 0,02 ppm
tin (Sn): max. 0,1 ppm
zinc (Zn): max. 0,1 ppm
carbon tetrachloride (G.C.): max. 0,01 %
chloroform (G.C.): max. 0,01 %
ethanol (G.C.): max. 0,02 %
methanol (G.C.): max. 0,01 %
formaldehyde: max. 0,0005 %
residue on evaporation: max. 0,0005 %
water (K.F.): max. 0,005 %